Carbon Fibre Vinyl Wrap Forged Carbon Black Gloss Sheet Film Bubble Free

  

Gloss Black Forged Carbon Fibre Effect. Carbon fibre FORGED wrap is the latest of the carbon fibres giving a SEMI GLOSS SATIN look. Our Carbon Fibre FORGED wrap comes with air channels for an easy, bubble free installation. Automotive-grade premium high quality cast vinyl conforms to the most challenging contours and shapes and can be re-lifted, re-positioned and stretched before going over with a squeegee. When applied correctly to the appropriate hard surface.

The film is very durable Any creases or folds will come out when headed by a hairdryer or heat gun. This process will not harm painted surfaces. Can be easily re-positioned during application and does not leave adhesive residue behind.

Top-quality German adhesive with built-in air channels for easy, bubble-free installation. Easily remove without residue, and will not harm the painted surface of your vehicle. Durable material coated with a UV protective layer and resistant to water, dirt, grease, salt, mild acid. Suitable for car, motorcycle or small car. Use tools: clean rags, doctor blades or credit cards.

Clean the car body's pasting position, conditionally use a cloth without fiber shedding, scrub with 50% alcohol or acetone, or use soapy water; the solvent-cleaned surface needs to be volatilized after the solvent is available. Step 2, under normal circumstances, slowly side of the paste, while using a tool to scrape flat, while exposing the end of paper. Step 3, if the car length and width are less than 10 cm, you can tear off all the stickers and then paste. But be careful not to accidentally stick or fall off the floor and get dust.