We have 3 different kit sizes that will fit your needs. This kit contains the sizes and quantities highlighted in yellow below. Carbon Fiber Fabric 2x2 Twill Weave 50 3k 5.7oz.
2:1 Thin Epoxy Resin with Hardener. 48oz Kit (1 Qt epoxy with 16oz hardener). 96oz Kit (1/2 Gal epoxy with 1 Qt hardener). 144oz (3 Qt epoxy with 1.5 Qt hardener). Epoxy Mixing Tub with Measurements.
If you run out of a certain material we can sell any single item by itself. This resin uses a 2:1 hardener. Mixing 2 parts epoxy to 1 part hardener will give you the appropriate final mixture. The 2:1 hardener has a pot life of 35-40 minutes at 80° F, set time of 5-6 hours and a drying time of 24-48 hours.
This is considered to be a slow hardener, Our 3:1 and 4:1 hardener epoxies will cure much faster. However this 2:1 hardener will provide you with the maximum working time possible and should not be used in temps under 70° F unless a very long curing time is needed. Slow hardener should be used at temperatures above 80° F for optimal overnight curing. The item "Carbon Fiber Part Wrapping Kit w Clear Epoxy 2x2 Twill Weave Large Kit" is in sale since Wednesday, April 22, 2015. This item is in the category "Business & Industrial\Other Business & Industrial".
The seller is "elitemotoring" and is located in Wausau, Wisconsin. This item can be shipped to United States.