Depending on the method of combining epoxy resin and carbon fiber, the amount you will need will vary. WET LAY: To best visualize this method, think of how surf boards are made, the cloth is layed on top and the epoxy resin is poured on top, absorbed, then the excess is squeegeed off. It's important to understand that the strongest and most flexible combination will use a 50/50 weight ratio. Meaning each for each 6 oz of cloth, you would want to use 6 oz of epoxy resin. With a wet lay this is much more difficult because you need more than 6 oz to spread on top.
Its recommended that you get at least double or even triple the weight of the cloth in resin for wet lays. The better you get at your technique, the less you epoxy resin you will use for production. RESIN INFUSION: Resin infusion uses a vacuum, and seals the cloth in plastic. The resin is then sucked into the mold and plastic.
This requires less resin to be used for production because it's directly injected into the carbon, and it fills the voids and gets absorbed by the fibers. Using a vacuum is the best way to get as close to the perfect 50/50 cloth to epoxy weight ratio.
For this process you would use something close to 50/50 but a little bit more, which can be absorbed by the. This is the perfect starter kit to learn how to use and master Carbon Fiber Epoxy. This kit uses the best carbon and the best epoxy 100% Made in USA.Length = 108 (3 Yards). Extremely CLEAR with UV additive. Mix: 2 Parts Resin 1 Part Hardener. Amount: 8 oz Resin + 4 oz Hardener = TOTAL 12 oz.
Please feel free to ask any and all questions. The item "3 YRD Carbon Fiber FAST Epoxy UV Resin Kit 96OZ = 3/4 Gallon 2x2 Twill" is in sale since Saturday, November 7, 2020. This item is in the category "Business & Industrial\Other Business & Industrial".
The seller is "socalapparel" and is located in Long Beach, California. This item can be shipped to United States.